Magical Wintry Forest stencilling cards | Pops of colour, without colouring!

Hi guys!!

Today’s post is all about ink blending extravaganza, using the lovely and totally dreamy Wintry Forest layering stencils and yummy inks from Pinkfresh Studio!

I absolutely love stencils because they are so versatile and affordable. Stencils that can cover several occasions also add to their allure. At first glance you might think that this Wintry Forest stencil isn’t going to be meant for anything but holiday cards, buuuuuut I’m hoping I will make you see that it’s actually rather versatile.

Ok, full disclosure, I DID end up using foiled sentiments from the Perfect Sentiments Holiday set, because I have finally cracked foiling after it eluded me for ages. It took watching many videos by Yana Smakula and Channin Pelletier to get to grips with it, so if you are struggling like I was, know that there is a knack to it and don’t give up!

Currently the Perfect Sentiments Holiday set is sold out, but the Perfect Sentiments set is in stock. If you definitely want the Perfect Sentiments Holiday set, make sure to sign up for back into stock notifications.

Having said that, these backgrounds would work for all sorts of occasions, like thinking of you, sympathy, retirement, masculine birthday and nature lovers birthdays.

Instead of going for the expected look with greens for the Wintry Forest stencils, I went purple, blue and then fiery with yellows, oranges, red and fuchsias. I also added a generous splattering of gold on all three, because I love that as a finishing touch.

For the first card I used all the purples, from light to dark, Soft LilacLavender ,Candy Violet  and Regal Kiss. The last layer is LOTS of Regal Kiss for that deep, dark purple colour.

Because I love blues I also used the Morning Sky blues: Sky BlueSummer ShowerSeaside and Storm. These are just dreamy. On this one I used Sky Blue for the first two layers, very soft on the first and a bit more saturated for the second layer.

For the last card I used Lemon Whip and Sunshine, Apricot and Persimmon, Coral Reef and Berrylicious, and finally Bubble Gum and Raspberry Bliss. I used the lighter colour first, and then added a little bit of depth and intensity with the darker colour after. On this one, I didn’t line up the stencils according to the markings either, to leave a little bit more white towards the bottom so you could still see that there were different layers.

IMG_2126

When I had finished the ink blending, I popped them, one by one, into a box and splattered some gold watercolour on them. After these had dried, I trimmed the blue and the purple down a little and adhered them to white card bases.

IMG_2129

The sentiments I picked out are done with both rose gold and gold foil, using the Perfect Sentiments Holiday set. I also cut out some extra pieces using the coordinating diecut, and layered the sentiments up for a little bit of dimension.

The purple card got a rose gold foiled Merriest Christmas. This one is layered up with two more pieces to pop it up a little.

The blue one got a Warmest Wishes in gold foil. This one is also popped up with two pieces.

The fiery forest got a rose gold foiled Merry & Bright. This one has three pieces for more depth and dimension. This one isn’t trimmed down, but I probably should have done that. However, I had adhered the sentiment already, so I couldn’t trim it. Oops.

Ok, that’s it from me for today, I hope you enjoyed this post too, and will try an unexpected colour combination yourself with your stencils. You never know how it will turn out until you give it a go!

As always, I have used compensated affiliate links in this post at no extra cost to you. Shopping with affiliate links does not cost you anything extra at all, the company it’s linked to will pay me a small commission as a thank you for directing you to them. Any earnings I get from these links go directly back into the running of this blog, my YouTube channel and Instagram. A little bit will be put aside to renovations of my forever craft room as well, as we are in the process of buying our forever home, which is so exciting! Thank you so much if you chose to support me by shopping with these links, I really do appreciate it so much! 

Lots of love and happy crafting from Erica

You can find me on various social media platforms, by clicking the links below.
My blog
Instagram
My YouTube channel
CaCaCraft on Facebook

WOW! Embossing Powder New Release

Hi and welcome back to a sparkly and glittery post!

Today’s post is all about the newest release from WOW! Embossing powder. It’s been available in the UK WOW! shop for a little while, and is now available across the pond in the US WOW! shop. We are celebrating with an Instagram hop, full of inspiration and gorgeous projects from the design team!

Make sure to join in the hop over there as there are prizes up for grabs, not to mention a ton of inspiration from the design team.

For my cards I’ve used an array of the products, including stencils and stamps designed by my crafty friends! This is super exciting to see, and I’m absolutely thrilled to be showing them off today.

For my first couple of cards, I have used the Modern Winter Forest stamp designed by Verity Biddlecombe. The cards are both heat embossed with Rich Gold, and I’ve used the same colours on them both, with different techniques. Salvaged Patina, Chipped Sapphire and Black Soot were ink smooshed on one, and ink blended with Life Changing Blender Brushes on the other.

I’ve also used the gorgeous big Snowflake Stencil, another of Verity’s designs, in a couple of ways. On the first one, I ink blended some left over ink on my brushes to create a pastel look.

On top of this I stamped up Winter Wishes & Snowflake Kisses in black ink, and then added a generous smattering of clear sequins.

I loved this so much that I did it again on another panel. While I had the stencil in place, I dabbed on Embossing Ink with a foam ink blending tool and used Halo embossing glitter all over.

I did forget to use my anti-static tool on the panel before, so the left-over Pixie Spray made the Halo glitter stick to it. In the end I actually like the results, as it looks like snow falling around the snow flake.

The Merry and Christmas, are from the Merry Sentiment stamp set, were stamped up with the Embossing Ink on white card stock, and then I heat embossed them with Platinum embossing powder. Around the Merry I fussy cut, which I normally absolutely detest, but I didn’t want to cover up the gorgeous snowflake by keeping it on a banner.

The smart thing about this Snowflake stencil set is that you get both the negative and positive cut of the snowflake so I went ahead and used them both. On my third card, I decided to use the positive stencil too, with the help of Pixie Spray. This time I grabbed the Duo Transfer Gel to add glitter. This was more of a test as I had never tried adding glitter this way. I think I jumped the gun with adding the glitter though, I should have waited until it was clear and tacky, but oh well, I sprinkled some Made You Blush from the Pink-a-licious trio and some Icicle Teal from the Winter Dreams Trio, then heat embossed it with my heat tool from underneath.

If heat embossing intimidates you, you can still use the stencils without any of that. I did exactly that with the In The Forest stencils. With lots of green shades of Distress Oxide inks, I blended a big forest and then finished it off with a simple sentiment from the It’s The Season stamp set.

I had another ink blended panel, that I used the In The Forest stencil on. Here I dabbed the Embossing ink pad directly through it, and heat embossed Rich Gold on it. It still needed something else so I used the Starry Nights stencil too. Again, with Rich Gold to keep it cohesive. A simple Happy Holidays, from the Snowy Christmas stamp set, was stamped with black ink directly onto the card.

That’s it for me for today, but don’t forget to check out the Instagram hop. There are 2 x $25 gift cards to our online stores (both UK or USA). Leave a comment by Sunday, August 1st 2021 on each stop for a chance to win. Winners will be chosen randomly from the comments left on each participating designer’s post. The 2 x winners will be announced on the post on WOW! Embossing Instagram page on Wednesday, August 3rd 2021.⁠

I have used some compensated affiliate links in this post, at no extra cost to you, for your convenience. If you shop using these links, I get a small commission from the company directly. Thank you if you chose to support me by using these links, I really appreciate it!

Lots of love and happy crafting from Erica

Exciting news!! Introducing the Card Makers Success Summit!

Hi guys!

I have something exciting to share today, and it’s been long in the making.

It’s so totally outside of my comfort zone, and it’s taken a lot of head-scratching, wailing against the technology vendetta that has definitely amped up against me as well as push me way past what I ever thought I would volunteer to do. Without further ado, let me introduce the Card Maker Success Summit hosted by Stamp Me Some Love aka Brandi Mahon!

It’s a free online card making event taking place in a couple of weeks! It kicks off on Facebook on the 14th and then the 15-18th of July it’s class, after class, after class of fabulous creators and so much inspiration. This year’s Christmas card making will be such a breeze with all these ideas!

Registration is officially OPEN for the Card Maker Success Summit!

This summit was created to help you develop a game plan for your holiday card making project. Think ‘Christmas In July’ but on steroids!

There are 25+ incredible speakers, teachers basically, with topics ranging from Ink Blending to Interactive Cards, and everything in between. I’m both terrified and excited that I am one of the speakers!

It’s going to be 4 action-packed days that you won’t want to miss!

Click the link below to learn more and get your free ticket. Who’s excited?!

Register FREE for the Card Maker Success Summit now!

See you there!

Christmas Card Collaboration with Courtney Kroeber

Ho, ho, ho, my merry peeps!

Today’s post is the corresponding blog post for a YouTube video that’s up on my channel today. I’m collaborating with Courtney Kroeber for her 25 Days Of Christmas Cards series and we decided on Copic coloring for our cards.

Now, this might come as a shock as colouring is basically the theme of this card, but I have not used a single stamp set here!! Not a one! Say whaaaaat? I decided to use the Strings Of Lights diecuts from Lawn Fawn and cut out lots of the baubles out of Copic friendly card stock, and these I have coloured.

To get these looking as lifelike as possible, I have used quite a few markers on each one. Going from dark at the edges and lighter and lighter towards the middle.

The screw tops I had to play around with several tries before I was happy with the look. I thought blending the colours would give the most realistic look, but I was so wrong! In the end, what I liked best was using C4 with light flicks, and then going in with C5 to add depth and the illusion of the curve.

With a huge selection of baubles coloured, it was time to think about the actual card base. I had an idea in my head, and went about trying to make it come to life but man… it was a bit more trouble than I thought! The idea was to use the Take A Bough Encore dies from Concord & 9th and create a Christmas tree look. Sounds cool, right? Whilst I got there in the end, it ended up being a very heavy card! This is not one to be sent in the mail, unless you are happy to pay a lot extra for postage.

First of all I cut out a slim line panel using the Slim Line Diecutting System from Picket Fence Studios. Using this as a guide, I then absolutely COVERED it with the Take A Bough Encore pieces. These, and the background panel, are all cut out of Evergreen card stock, from Concord & 9th. When I had a good coverage around the edges, I covered them with a strip of Press’n’Seal and picked them all up. To make sure all of them would stick to the background panel I used Pritt-stick glue. Yep, very old school indeed!

When the edges glued down, I just had to cover the middle with the larger boughs. To make sure the tree looks lifelike, I didn’t cover the backs of the bough dies with glue, only the middle part.

With my “tree” done, I could start the decorating with the baubles! I cut out lots of extra string from the diecut set and then got puzzling. What I realised here though, is that I should have coloured up more of the smaller baubles, instead of going to town with the bigger ones. Admittedly they were easier to colour.

As it’s pretty obvious what occasion this card is for, I didn’t add a sentiment to the front of it. The Man actually said ‘Nobody is going to look at that and think Happy Easter’, lol!

Well, that’s it from me but I hope you get a chance to hop on over to my YouTube channel to watch the video, and then drop by Courtney’s channel to see what she made.

I have used some compensated affiliate links in this blog post, at no extra cost to you, for your convenience. Thank you so much if you shop using these links, I really appreciate the support!

Lots of love and happy crafting from Erica

Picket Fence Studios November Release is here!

Hello, hello!!

It’s the 14th, which means the November release from Picket Fence Studios is live! This month we have some really fun stamp sets that will work amazingly with the Slim Line Diecutting System! And dogs!! The set is aptly named Pet All Of The Dogs, and comes with coordinating diecuts too. Yay says this Crazy Dog Lady.

There are also a couple of coordinating diecuts for previously released sets, which I’m loving. Fussy cutting is not my favorite at all. In fact, I avoid it at all costs. A Rose and You Or WiFi now have their coordinations diecuts. You can find A Rose stamp here and the coordinating diecut here and You Or WiFi stamp here and the coordinating diecut here.

Another slim line stencil, Daisy Chain, is added to the growing collection of slim line stencils, and this one also has a 6”x6” one in the same pattern, in case you are not a slim line convert.

I am also LOVING the snowflake dies! There are three bigs ones: Lydia, LaWanda and Alice, then there is a pack of five smaller ones called Winter Snowflakes. I may or may not have gone way over the top with cutting out snowflakes of all colours.

While I was cutting these out, I thought I’d try and make the process a bit faster and more accurate. The super simple solution was to line up the snowflakes in a row, as close to each other as I could, then secure them with PostIt Tape. This saves time arranging the dies every time you run them through your diecutting machine, and it also saves paper. WIN-WIN!

After cutting out a rainbow of snowflakes, I needed a card base. My first thought was to create a slim line card with the Slim Line Diecutting System, and one ended up being two… and three… and four…. I have no control once things start snowballing in my craft room.

Anyway, my first card was done by literally COVERING the background piece with colourful snowflakes! It is so tactile and lovely. I didn’t want to cover up too much of it, so I just added a vellum strip with Merry Christmas heat embossed in gold on it.

A second card was done in a different technique. I made a “patterned paper” by glueing snowflakes to the smaller of the rectangles from the Slim Line Diecutting System. This was then added to the larger rectangle, and that was added to a card base. I also cut out three circles out of vellum, and added a snowflake cut out of glitter gold to each one. The sentiments are from Inside Quotes: Christmas.

For this next card I grabbed some coloured card stock from Concord & 9th in Stardust, Sorbet, Grapefruit and Honeysuckle, and used the Lydia Snowflake for a colourful array of snowflakes.

Across these snowflakes I adhered a slim vellum banner that had Merry Christmas heat embossed on it, in gold. The final touch were a very generous scattering of Gin & Tonic sequins, that I adhered with Glossy Accents.

I have a habit of making loads and loads of background and sentiment diecuts and strips, when I’m on a crafting binge. I keep a lot of these for future use, and for my next card, I am VERY glad I did!

This was a failed experiment with rainbow foil and Transfer Gel Duo, over the Mermaid Scales stencil. I didn’t wait long enough before I tried adding the foil, and the gel wasn’t set enough, and it ended up squished all over the card stock, rather than giving me beautiful foiled mermaid scales. Oh well, it was still so pretty I couldn’t bear throwing it out.

I used both the Lydia Snowflakes and Winter Snowflake dies on it, and oh my gosh, W-O-W!! They turned out freaking amazing!!

The background has a very light ink blended pattern, using the Slim Line Rainbow stencil and a Life Changing Blender Brush with some dark ink left on it. It could be Black Soot Distress Oxide ink… My idea was for it to look like snow drifts, but due to a mishaps I had to turn it around. It worked as clouds, instead so yay!

A quick sentiment from Inside Quotes: Christmas finished this one off.

I also have a video up on my YouTube channel, showing the whole release off and the Winter Snowflakes cards! There will also be a new video each day for the next THREE days, yes! I got quite carried away with the card making and actually remembered to film most of it.

OK, that’s it for today. Thank you so much for stopping by and spending some time with me. As always, I have used some compensated affiliate links in this post, at no extra cost to you whatsoever.

Lots of love and happy crafting from Erica

Case Me A Christmas Card with Michelle Lupton and Friends!

‘Ello mates! (That’s me channeling my inner Aussie)

Today’s post is a collaboration with the lovely Michelle Lupton, who’s doing a fun Christmas card making collaboration with lots of crafty friends. The idea is to CASE/Copy And Selectively Edit a card from each other and do it in a Christmas theme.

I had a hard time picking one because Michelle makes AH-mazing cards! Check out her Instagram to see for yourself. After going back and forth and then back and forth again, I finally settled on this gorgeous card.

I started out with a stencil from MFT Stamps called Peace, Love and Joy, and Gold Deco Foil transfer sheets. To attach the foil to the pattern, I used Transfer Gel Duo with a spatula. Of course I sprayed the stencil with Pixie Spray first. Whilst waiting for that to set, I started working on a second card.

On the second card I used the HoHoHo background stamp, and heat embossed it in white. I used Opaque Bright White from WOW! Embossing as well as their Embossing Pad.

On top of this I used a light watercolour wash to add some colour, like the original card. These water colours from Gansai Tambi are really rich and pigmented so you only need a tiny bit.

When that was dry, I added it to a card base. To then achieve the look of the inspiration card, I adhered two panels cut out of white card stock, on each side of it. A little christmas sentiment stamped on a slim banner was the last touch to this one.

The first card was finished off by adding the foil to the pattern and the transfer gel, then run through the diecutting machine. It works so great, and you don’t need a laminator with the Transfer Gel Duo either.

This card also got a slim banner with a christmas sentiment added to it, and was adhered to a card base. The sentiment set I used is from MFT Stamps and is unfortunately not available any longer. Which is a shame as it’s perfect for winter/holiday/Christmas cards.

That’s it from me for today, but I hope you will make sure to hop on over to Michelle’s blog post and check out what card she CASEd from me.

I’ve used some compensated affiliate links in this blog post for your convenience. If you shop using these links I get a small commission from the company directly at no extra cost to you whatsoever. Anything I make from these links go towards the running of my blog, YouTube channel and Instagram. Thank you so much if you chose to support me in this way, I really appreciate the support and encouragement!

Lots of love and happy crafting from Erica

25 Days of Christmas Tags 2019!

Hi guys! Or should I say ‘ho ho ho’?

Today’s I’m helping Tracey McNeely celebrate 25 Days Of Christmas Tags with the Picket Fence Studio team! Every year since 2010 Tracey has been doing this fun event and this year is my first time taking part.

If this is your first time hearing about it or if you want to find out more, make sure to stop by Tracey’s blog HERE. There are so many companies taking part and sponsoring this event, that’s running for the 9th, yes that’s NINTH, year!!

Right, let’s get to my tag, shall we?

Making tags is really not my forte, at all. I see people make the most amazing tags and always think to myself that I should try it, because I do get inspired when I see them. And then I get to the craft room and I got zilch… nada. Zero. I don’t know what it is. Well, until I started looking through my stash for an actual tag die… and came up empty handed! The best I could do what this bottle gift tag die, which I have had for years, but never really used. Again because of the zilch ideas.

But I digress. We are here to talk tag making. Not non-tag-making. So, armed with my bottle gift tag die and some Neenah card stock, I cut it out. Step one complete!

Next I stamped the Santa from the aptly named Straight From The North Pole stamp set, with Hybrid Black ink, on the tag directly. I coloured in Santa with Copics and added some sparkle to his hat with White Blizzard glitter drops from Nuvo. I added a teeny tiny bit to his eyes too, because Santa’s eyes should always sparkle, right?

I also heat embossed one of the sentiments from the set, ‘this is straight from the North Pole’ in Gold Rush from Ink on 3. Obvi I used my anti-station tool all over it first. The final touch was a bow with a red ribbon with ‘Ho Ho Ho’ all over it.

Well, I must admit I’m pleased as punch about this tag, seeing as it’s my first in a long time! I will definitely have to invest in some proper tag diecuts though. Any excuse, right?

That’s it from me for today but thank you merry much for stopping by!

Lots of love and happy crafting from Erica

Picket Fence Studios | SSS Stampteber Collaboration Card | 12 Weekends Of Christmas

Hi guys!
Today’s card is a quick one featuring the exclusive Picket Fence Studios Stamptember stamp set, Shake Your Flake, from Simon Says Stamps!

SSSStamptember

Unfortunately, due to the postal force not being with me or on my side, I didn’t get my stamp set in time to participate in the festivities on the day it was launched. So I’m making up for it now instead! I will also put this card in with my 12 Weekends Of Christmas Series as I’m scrambling to make up enough Christmas cards in time for the holidays! Even though technically it’s not the weekend.. unless we pretend it’s a really long weekend this week? Yep, I’m gonna go for it.

I stamped up the cute snowman with the kitty, as well as the dog, on Copic friendly paper and coloured them in. Once all done, I fussy cut them out and set aside while I worked on the background.

Armed with my Life Changing Blender Brushes and Distress Oxide inks in an array of colours, I blended a northern lights inspired night sky. On top of this I also splattered lots of gold for stars and then white paint for snow flakes.

As the scene was featuring snow falling, I thought it would look cute for the snowman and the dog to sit on top of a snowy hill. I cut one out of vellum and another one out of hammered white card stock. This was done with the Lawn Fawn Stitched Hillside Border die.

I layered these up and trimmed them down before adhering them to the background, which I had adhered to a card base. Then I glued down the snowman and the doggie too. As a last flourish I thought I’d add some snow around the bottom of them, but I had a little bit of a mishap with my 3D snow. It flowed out far too quickly and soaked my snowman!

After drying, it looks a bit better but if you look really close, you can see the 3D snow has ‘crawled’ up the snowman a little. Oh well, I will have to remember that for next time I use that stuff. Or go straight to Puff Powder from WOW! Embossing instead.

The sentient I chose from the stamp set is ‘you are my favourite reason for the winter season’. I heat embossed this on a piece of vellum, with Antique Gold embossing powder from Altenew. This is trimmed down and wrapped around the card at the top. With that the card was done!

I’ve used some compensated affiliate links in this post, mostly to Picket Fence Studios, at no extra cost to you. Any links that are not affiliate links are there for your convenience. Happy shopping!

Thank you for much for stopping by today. Lots of love and happy crafting from Erica

If you want to see more of my crafty shenanigans, come find me on social media

YouTube: https://m.youtube.com/channel/UCLI_WLw9Et5Zd-DONeY5XDg

Instagram https://www.instagram.com/erica_cacacraft/

Facebook https://www.facebook.com/cacacraftandcreations/

My blog https://cacacraftblog.wordpress.com

Picket Fence Studios September Release | Christmas Poinsettia Star stamp | Arteza Sketch TwiMarkers + Video

Hi guys!

I hope you are all doing well and are excited to have a look at the latest release from Picket Fence Studios! This is my first time posting as part of their design team and I couldn’t be more excited. As soon as I saw the sneak peeks of the sets coming out I was inspired! There are so many fantastic Christmas sets in this release. Some of my favourites include the Winter Clothes Collage (See below), A Little Nuts and all the new foiling impress dies!

winterclothescollageC109

Anyone who knows me knows I’m a huge sucker for big blooms so when I spotted the Christmas Poinsettia Star stamp I knew I’d be using that one right away. It’s probably not a surprise that this blog post is dedicated to that stamp, lol.

I started out by heat embossing it in white, on water colour paper. Both the embossing ink and the Arctic White  Embossing powder are from Inkon3. To make sure I got a good imprint, I used my MISTI to stamp it.

After the heat embossing was done, I got my brand new Arteza TwiMarkerss out to colour the flower with. I have a YouTube video showing these off, I made yummy swatches as well as coloured the flower in. Hop on over to my channel if you want to check that out too and see the markers in action.

When the Poinsettia was coloured in, I cut out a mask to cover it and keep it pristine while I did some ink blending around the flower. I used two shades of grey Distress Oxide inks, Iced Spruce and Hickory Smoke to create a grey/silvery background. I find that adding colours to the background around big images helps them pop more!

Naturally I used my beloved Life Changing Blender Brushes, another Picket Fence Studios gem, to do the ink blending. These brushes have been such a game changer for me, I can not stress enough how fabulous they are and what a difference they made for me.

With the card background and flower done, it was time to add a sentiment and I decided to use the FaLaLaLaa foiling and diecut sentiment. I got a Spellbinders Glimmer Hot Foil machine earlier in the year but like an idiot, didn’t realise that I can’t use Minc foils with it so I thought it was rather rubbish. *True story*

Nope. The foiling machine is great. It’s indeed FAB and I was a bona fide idiot who didn’t read the instructions properly! Now I know to use the right kind of foil, I want to foil all the things!!

I used silver foil to keep with the colour scheme of the card (and also because the only other colour I have is rose gold and that didn’t fit) and then I used the diecut to cut out the sentiment. This I added to the card with a bit of liquid glue, I use Lawn Fawn’s glue tube, in the bottom right corner.

Once that whole shebang was added to a card base, the card was done!

I love how it turned out. A big gorgeous bloom and a blingy sentiment, what else do you need? Because this is a great way to make big impact Christmas cards, I’m going to include this post in my 12 Weekends Of Christmas series. This design could quite easily be mass produced and thanks to the water colouring aspect, each card will still be unique and special.

As always, this post is full of compensated affiliate links, mostly to Picket Fence Studios. At no extra cost to you, of course. I do however try and link everything I use, even if I’m not an affiliate, to make shopping easier for you.

Lots of love and happy crafting from Erica

If you like my work, and want to see more crafting shenanigans, you can find me on various social media. Stop by and say hello!

Instagram https://www.instagram.com/erica_cacacraft/

Facebook https://www.facebook.com/cacacraftandcreations/

My blog https://cacacraftblog.wordpress.com

YouTube https://www.youtube.com/channel/UCLI_WLw9Et5Zd-DONeY5XDg

12 Weekends Of Christmas Part 3

Hi!

Right at the nick of time I’m finally getting back on track with my 12 Weekends of Christmas series. Three months out of six ain’t so bad… right? (No, you are right, it’s rubbish. 50-50 isn’t a good result) So from here on out, it’s gonna be a few of these a month to make sure I hit my target of 12 posts before Christmas.

Today I have used the first ever item I bought from Concord & 9th, the Take A Bough tree die. As soon as I saw Angie making that first tree, I had to have it. HAD to. H-A-D to! I have made so many trees with it since my window will is overflowing. However, I haven’t made a single one in actual pine colours. How is that for ironic?

With the help of my marvellous Gemini Go diecutting machine, I got to work with three different shades of green card stock and the Take A Bough die. I made enough for two trees because why not?

After I had cut out all the pieces I needed, I used the Lawn Fawn gluetube to glue them all together. I use four pieces with the two biggest boughs to make a really thick and dense tree. When all the pieces were ready, I threaded them onto kebab sticks to make the two trees.

The base for the trees are slivers of wood, which I drilled holes into, filled with glue and stuck the sticks into. To make sure they stayed straight and upright, I held them in place while the glue set a bit.

There is a star die in the set and I cut out two pieces each out of gold and silver glitter foam. These two I glued together and added to the top of the trees, with more of the Lawn Fawn gluetube. With that, the trees were done!

I have got a YouTube video for the whole process too, if you want to check that out.

I have used a few compensated affiliate links in this post. What that means is that I get a small commission from the company directly if you use these links when shopping. At no extra cost to you!

Thanks for stopping by today, I hope you enjoyed this post, and the YouTube video, if you watched that.

Lots of love and happy crafting from Erica!